News center

Innovation, integrity, pragmatic and efficient

News center
Contact us

Huangshan economic development zone,jiaonan,Qingdao,China

024-23609806 024-23609560

E-mail:xuehongbin1982@hotmail.com

Industry news
Position:Home > News center > Industry news >
What are the warning signs for solid tyres before they are s
Time:2017-09-25 15:24 Reader:
Forklift solid tire is an important component of the forklift, if in the process of moving once the failure and other shortcomings, to bring the forklift, the consequences would be disastrous, can cause the vehicle lost control, and it is difficult to reach the destination. As long as a clear understanding of whether the tire deformation, performance is down, you can promptly replace the new tires, to prevent the emergence of shortcomings.
Failure omen of solid tire for forklift truck:
The tire tread depth markings: tread markings on the thickness must be greater than 1.6 mm, if you often travel driving on slippery roads have low friction on the best to ensure the tread stripe thickness is two times of the above values. Can buy a meter to measure the thickness of the tread markings, can also use a one yuan coin, along the direction of the top national emblem pierce tread gully, because the top of the coin edge to the national emblem in the interval between 1 to 2 mm, so if you can see the entire national emblem logo, clarify the tread thickness markings. Now the lack of.
Tread marking lines; because the new tires have a more user-friendly plan than the old ones: tread markings. When the tires are very new or very low wear, these lines will hardly be detected, but when the wear reaches a certain extent, these lines hidden in the tread of the tread appear.
The tire side wall crack; because the tire problems are not fully assembled in the tread, the tire sidewall will also show some disadvantages. Through observation, find the cracks and cuts that are visible to the naked eye on the side wall of the tire. These tiny grooves indicate a possible leak of gas on the tires, worse still, and even a burst of tyres. These are the tyres we all want to prevent.
Because of the presence of a certain amount of vibration in the course of the vehicle, it is inevitable, especially under bad road conditions. With respect to the person who has a certain driving experience, it is possible to determine how the solid tires of the forklift vibrate in a reasonable range and how they vibrate to clarify the shortcomings of the vehicle.
返回列表
The next article:Classification and characteristics of solid tyres
In the previous:none

Qingdao Hongbin Industrial Co.,Ltd. ICP For the record number:鲁ICP备17041787号-1 

Tel:0086-532-83121877 / 0086-532-86937777 E-mail:xuehongbin1982@hotmail.com

Technical support:netpin